$154 (Sold Out)
Ideal for use with windlasses, this double braided nylon rope is professionally spliced to a generous amount of HT G4 chain. By purchasing a pre-spliced rope and chain package, you save the extra expense, time, and effort of custom splicing the rope and chain separately.
Each windlass is equipped with a gypsy that fits a particular size of rope and chain. As well, each windlass will fit BBB Chain, HT Chain, or both. To determine your required chain and rope size, refer to your windlass manual. HT chain may also be referred to as G4 Chain, G43, ACCO HT Chain, or High Test chain, all of which are interchangeable.
Remember to always confirm rope and chain size against your windlass manual as gypsies vary.
Note: This rode is not compatible with the following windlasses:
Lewmar 700 series
Maxwell Freedom series
New braided rope should be soaked in water (salt or fresh ok) to condition the rope so it can be used in the windlass initially. When the rope is used dry and new, slippage or sticking in the gypsy can occur. Once wet and used, braided rope generally performs better than 3-strand.
Related Articles & Videos
Article: What Type of Rope/Chain Do I Need For My Windlass?
Video: All About Anchor and Windlass Chain for Your Boat
Video: How to Choose Anchor Rode
Works very well, Good product
Good quality, I replace the same one I had to cut from a stock anchor. I use it for a 10000 pound 30 feet boat.
Put it today, Ran it thru windlass. All good day one.......... Ask me in the future.... Regards
Only issue I'm having is when the line gets "slack" (the anchor is no longer creating tension on the line) then it gets hung up at the point where rope & chain meet (windlass won't go beyond that point without help) but it's MILES above the original rope & chain I had before.
Works as advertised