Marine Hatch Installation and Care Instructions

Before installation, please check the following:

1. Check that the window frame can be fitted into the planned position (The maximum tolerance is +/- 1 mm)
2. Check that no damage will be caused to the superstructure, electric cables, lamps, and deck equipment
3. Check that the hatch has room to be opened freely
4. Place the window in the hole and check the fit
5. Clear away dust and clean the surface of the deck where you want to fit the window

Installation:

1. Apply sealant to the inner surface of the lower frame
2. Fix the window with screw
3. Remove any surplus sealant after drying
4. Check that the window is operating well

Care:

This window needs little maintenance. Clean it regularly with clean water. Do not use abrasive cleaners which may damage the appearance of the alloy or of the glass.