My Cart:

0 item(s)
You have no items in your shopping cart.




Profile Informations

Login Details

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

Boat Launching Wheels Installation and Care


  1. Place the metal transom brackets on the boat transom, a fair distance apart from one another. Be sure they are clear of any obstruction. The transom brackets should be mounted vertically and an equal distance from both the top of the transom and the bottom. Be careful to ensure there is enough clearance, when fully extended, to not touch the bottom of the boat.
  2. Mark the transom bracket mounting positions. Drill a 5/16” drill and secure the transom brackets by purchasing 5/16” bolts (6 total), 5/16” metal washers (12 total), and 5/16” nuts (6 total).
  3. Slide the two wheels into the mounting brackets and secure with the included clevis pins.
  4. Secure the wheels into the transom plates with the included lock pins.

Safety and Care

  • This product should not be used on boats exceed 400 lbs
  • Remove dinghy wheels when not in use